Amana Tool Amana Tool RCK-56 Solid Carbide V Groove Insert Replacement Knife 29 x 9 x 1.5mm for RC-1030 RC-1045, RC-1046, RC-1048, RC-1108
Amana Tool RCK-56 V Groove Insert
These industrial V Groove insert router bits were especially designed for applications including
- Miter Folds - "create the perfect joint"
- Signmaking and Lettering
The innovative CNC tool design uses a high grade carbide insert knife which allows you to get two uses out of each insert. Once insert knife show signs of wear you can rotate the insert for a brand new cutting edge. Secure locking screw system ensures maximum safety and maintains cutting accuracy. CNC router requires quality hold downs to ensure the least possibility of material shifting during operation.
Excellent for cutting:
- Aluminum, Brass, Bronze, Copper, Gold, Silver & Carbon Fiber (Engraving Only)
- Composites
- Composite Decking
- Foam
- Laminate
- Melamine
- MDF/HDF
- Sign Board
- Solid Surface
- Veneered Plywood
- Wood
- Xanita® Board*
- 20lbs High Density Urethane
*When working with Xanita LightBoard panel (X-board® X-board® plus) we recommend using MDF knives for better results.
Technical Specifications of the STEPCRAFT M.500 CNC System
Machine's Footprint (Width, Length, Height) | 23" x 28.6" x 25.4" |
X-Travel | 13.7" (348 mm) |
Y-Travel | 21.4" (543.6 mm) |
Z-Travel | 7.63" (194 mm) |
Gantry Clearance (Z) | 8.07" (205 mm) |
Table Work Area (X, Y) | 20.2" x 25.6" (513 x 650.2 mm) |
Max Feed Rate | 283 in/min (120 mm/sec) |
Lead/Ball Screws | igus dryspin 12x5 mm (optional HIWIN ball screws 12x5 mm) |
Linear Drive | Bosch Rexroth ball bearing linear guides |
Stepper Motors | Sanyo Denki NEMA 23 (1 on X and Z and 2 on Y axes) |
Positional Accuracy/Repeatability | +/- 0.0009" (+/- 0.025 mm) w/igus dryspin +/- 0.0005" (+/- 0.015 mm) w/HIWIN ball screws |
Programmable Resolution | +/- 0.0002" (+/- 0.00625 mm) |
Backlash | +/- 0.0019" (+/- 0.05 mm) w/igus dryspin +/- 0.0012" (+/- 0.03 mm) w/HIWIN ball screws |
Weight | 48.5 lbs (22kg) |
Power Requirements | 110V-240V, 50-60 Hz, 180 watts (Comes with 110V USA plug) |
Interface | USB 2.0 / Parallel (LPT1) / Network RJ-45 |
Computer Requirements | PC with 1Ghz Processor (Laptop, Desktop or All-in-One), USB 2.0 interface, Windows 7 or higher (32/64 bit) OR MAC OS X 10.3.9 or higher with Windows emulation (Parallels or BootCamp) |
Scope Of Delivery
- The M-Series machine will arrive completely ready to run. If you ordered a DIY Kit then it will come with all necessary mechanical and electrical components.
- UCCNC control software
- UC100 Parallel to USB interface
- USB Cable
- Power supply with 110V USA power cable
- 3 x Flexi Guides™
- WERA Tool Set
- Operating Manual
- Detailed assembly manual
Required Tools
- WERA tool set (Included in the DIY Kit)
- 5.5 mm box wrench
- Wire Cutter
- Long-nose pliers
- Cutter Knife
- Digital Calipers
- 3-in-1 oil and grease
System Requirements
- PC with 1GHz processor
- USB Interface (Optional Ethernet)
- Windows XP or higher (32/64 bit)
- MAC OS X 10.3.9 or higher with Windows Emulation