Vectric Cut 3D

https://www.stepcraft.us/web/image/product.template/136/image_1920?unique=3531ca4

WILL BE DELIVERED DIGITALLY, VIA EMAIL

299.00 299.0 USD 299.00

299.00

Not Available For Sale

    This combination does not exist.

    Description

     Cut3D is a dedicated toolpath engine for CNC machining 3D models that have been designed using a 3D CAD or Graphics design product such as AutoCAD, Rhino3D, 3D Studio etc. or scanned using a laser or touch probe device. Cut3D’s exceptionally easy to use interface leads you step-by-step through the process of loading a model, setting the size, interactively placing tabs to hold the job in place, calculating single, double or four sided roughing and finishing toolpaths, previewing the results and finally saving the CNC code to run on your machine.

    Technical Specifications of the STEPCRAFT M.500 CNC System

    Machine's Footprint (Width, Length, Height)23" x 28.6" x 25.4"
    X-Travel13.7" (348 mm)
    Y-Travel21.4" (543.6 mm)
    Z-Travel7.63" (194 mm)
    Gantry Clearance (Z)
    8.07" (205 mm)
    Table Work Area (X, Y)
    20.2" x 25.6" (513 x 650.2 mm)
    Max Feed Rate283 in/min (120 mm/sec)
    Lead/Ball Screwsigus dryspin 12x5 mm (optional HIWIN ball screws 12x5 mm)
    Linear DriveBosch Rexroth ball bearing linear guides
    Stepper MotorsSanyo Denki NEMA 23 (1 on X and Z and 2 on Y axes)
    Positional Accuracy/Repeatability
    +/- 0.0009" (+/- 0.025 mm) w/igus dryspin
    +/- 0.0005" (+/- 0.015 mm) w/HIWIN ball screws
    Programmable Resolution
    +/- 0.0002" (+/- 0.00625 mm) 
    Backlash
    +/- 0.0019" (+/- 0.05 mm) w/igus dryspin
    +/- 0.0012" (+/- 0.03 mm) w/HIWIN ball screws
    Weight
    48.5 lbs (22kg)
    Power Requirements
    110V-240V, 50-60 Hz, 180 watts 
    (Comes with 110V USA plug)
    Interface
    USB 2.0 / Parallel (LPT1) / Network RJ-45
    Computer Requirements
    PC with 1Ghz Processor (Laptop, Desktop or All-in-One), USB 2.0 interface, Windows 7 or higher (32/64 bit) OR MAC OS X 10.3.9 or higher with Windows emulation (Parallels or BootCamp)


    Scope Of Delivery

    • The M-Series machine will arrive completely ready to run.  If you ordered a DIY Kit then it will come with all necessary mechanical and electrical components. 
    • UCCNC control software
    • UC100 Parallel to USB interface
    • USB Cable
    • Power supply with 110V USA power cable
    • 3 x Flexi Guides™
    • WERA Tool Set
    • Operating Manual
    • Detailed assembly manual


    Required Tools

    • WERA tool set (Included in the DIY Kit)
    • 5.5 mm box wrench
    • Wire Cutter
    • Long-nose pliers
    • Cutter Knife
    • Digital Calipers
    • 3-in-1 oil and grease


    System Requirements

    • PC with 1GHz processor
    • USB Interface (Optional Ethernet)
    • Windows XP or higher (32/64 bit)
    • MAC OS X 10.3.9 or higher with Windows Emulation